Explore
Groups to get your gears turning
Insert the display board into the enclosure so the side with the connections faces the cutouts for the slide switch on the enclosure.
Arrange the ItsyBitsy so the USB port aligns with the USB cutout on the enclosure.
Arrange the lipo backpack with the JST port facing the slide switch cutout on the enclosure.
Connect a lipo battery to the JST on the backpack and coil the battery wires and fit the wires under the walls of the slide switch cutout on the enclosure.
Align the lid so the cutout fits over the slide switch walls on the enclosure. Insert the lid at and angle so the battery is in the center and gently press fit the lid onto the enclosure.