CircuitPython — image 1 of 1

adafruit_products_PyGamer_Bootloader.jpg
details

Plug your PyGamer into your computer using a known-good USB cable.

A lot of people end up using charge-only USB cables and it is very frustrating! So make sure you have a USB cable you know is good for data sync.

Double-click the Reset button on the top of your board (indicated by the red arrow in the first image). You will see an image on the display instructing you to drag a UF2 file to your board, and the row of NeoPixel RGB LEDs on the front will turn green (indicated by the green arrow and square in the image). If they turn red, check the USB cable, try another USB port, etc.

If double-clicking doesn't work the first time, try again. Sometimes it can take a few tries to get the rhythm right!

Back

Search