Build the Sequencer and Make Beats — image 1 of 5

feather_IMG_3313_2k.jpg
details

Remove the main arm from the base by loosening the retention screw.

 

Take one of the alligator clips off of one end, and place it into the base socket, then tighten.

 

This will allow three degrees of freedom in placing the board.

 

Add a nylon standoff and screw to the perma proto board as shown.

 

Clamp alligator clip onto the standoff. (Heat shrink tubing is optional.)

 

The stand can now be adjusted easily!

 

 

Back

Search