Add a Gate — image 4 of 4

makecode_IMG_6994.jpg
details

Create the Gate

 

On a scrap piece of cardboard, trace the top edge of the gate. This is a mirror image of the curvature on the inside of the tube! We will use this as a guide to create a door that sits flush inside the tube.

 

Cut out the "U" shape you traced. This is your guide.

 

Trace shape onto a long piece of cardboard. Extend the lines further down the piece of cardboard. This is the outline of your gate.

 

Cut out the gate and poke a small hole in the top edge.  

Back

Search