Give Sparky a Soapbox — image 5 of 6

circuitpython_IMG_4156.jpg
details

Cut out two supports to hold up Sparky. Trim the corners just enough so that they don't extend off the back of the box.

 

IMPORTANT: Use your servo to measure the distance from the the hole to where you'll place the right support. Add a little extra distance to account for the thickness of the foam tape.

 

Allow the supports to extend beyond Sparky's outline by about 1 inch. This will give clearance for the mouth to move.

 

Tape supports firmly in place. 

Back

Search