Build the Morse Code Paddle — image 2 of 5

projects_morse_IMG_1263_2k.jpg
details
  • Plug the Gemma M0 into the battery box, then secure both to the end of the board with a rubber band or tape
  • Connect the Gemma M0's GND pad to the contact nail with an alligator clip lead (or twist the ends of solid core hookup wire or stranded wire around the pad and the nail if you don't have alligator clip leads)
  • Connect a wire from the Gemma M0's D2 pad to the conductive material on the right leg of the clothespin paddle
  • Connect a wire from the D0 pad to the left leg conductive material
Back

Search