Explore
Groups to get your gears turning
…but that’s not the only option.
This TFT display has right-angle header pins on the front of the board (front, back, doesn’t matter as long as the wires connect in the same order). This makes it very slim, but also a fair bit taller.
And this OLED has an 11-pin ribbon cable directly soldered to the board, no header pins at all. Again…front or back, ribbon could go straight out or can double back across the board…it all depends on your construction and space needs, as long as the pin order is followed. This is the most space-efficient, but requires patience and ace soldering skills, and isn’t easily re-used in other projects.