Explore
Groups to get your gears turning
Now we can measure the wires for the LED and the push button. For the push buttons we’ll measure from the battery walls in the center, to the opening on the side of the brick. The LED will connect from the center cut away to the top of the two middle walls.
Match up the wire lengths for the opposite side and cut them to size. Tin all of the wires so they won’t fray while soldering together. It’s also a good idea use silicone coated wires since we’ll need to flex the wires to fit inside the brick. Here we’re using 30 gauge silicone coated wire to fit between the wall gaps.