Assembly — image 3 of 4

weather_switch-en-wired.jpg
details

Connect Slide Switch (Optional)

If you'd like to turn off the circuit without having to remove the display from the case, you can break out the slide switch. You'll need to wire up a a slide switch. It will need to connect to the EN and GND labeled pins on the 2.4" TFT FeatherWing. Here, we connected the terminals of slide switch to jumper cables. The jumpers can plug into the female headers on the 2.4" display.

I used the tips from male jump cables to create a "slim" version by removing the plastic housing and trimming it short. Then, I soldered the tips to pieces of wire – This way, I can easily plug into the female header on the TFT display.

Back

Search