Wiring — image 2 of 2

3d_printing_button-pwr-wired.jpg
details

Wire Pushbutton + LED

A regular pushbutton doesn't require specific polarity, so you can freely choose which lead to be positive and negative. Since my pushbutton has an LED, polarity matters – luckly the LED has a positive and negative label right on the pushbutton. So, depending on your project / pushbutton, wire them accordingly.

Add Resistor to LED

A current limiting resistor is required to prevent the LED from blowing out. I used a 220ohm resistor inline with the wire and the positive lead.

Back

Search