Circuit Diagram

EL Layout

This provides a visual reference for wiring of the components. They aren't true to scale, just meant to be used as reference.

Carefully fold the EL wire to outline both arms with the female connector near one of the jacket pockets. For the legs, we'll fold the EL wire by looping it around booth legs. Have the female connector end in the center, near the jackets pocket.

Connections

 

The Inverter connects to the In-line wire 1-to-4 splitter. Two 250 cm long pieces of EL wire connect to one of the 4 female connectors.

 

Battery

 

The striped wires are soldered to the 9v Battery Clip. The white striped wire goes to + (positive) and the plain black wire goes to ground.

This guide was first published on Oct 24, 2018. It was last updated on Oct 24, 2018. This page (Circuit Diagram) was last updated on Oct 10, 2019.