This embedded content is from a site (www.youtube.com, flickr.com, etc) that does not comply with the Do Not Track (DNT) setting now enabled on your browser.
Clicking through to the embedded content will allow you to be tracked by the embed provider.
Make this ambitious costume project for Halloween or cosplay event! Before you begin this ambitious and time-consuming project, complete the following prerequisite guides:
- Adafruit NeoPixel Überguide
- Getting Started with FLORA
- Battery Powering your Wearable Electrnics
- Making Rugged Wearables
To make this project, you will need:
- Mini PCB NeoPixels, ~74
- Silicone coated wire in 30 gauge
- FLORA main board
- 1200mAh lipoly battery and charger
- JST extension cable
- soldering tools and supplies
- sewing tools and supplies
- electronics tweezers
- foam head
- multimeter
This embedded content is from a site (www.youtube.com, flickr.com, etc) that does not comply with the Do Not Track (DNT) setting now enabled on your browser.
Clicking through to the embedded content will allow you to be tracked by the embed provider.
Text editor powered by tinymce.
