Assemble DVI CowBell and Pi Pico
Solder headers onto the Pico and DVI PiCowBell to fit both boards on the Proto Doubler. The Pi Pico USB port aligns to the JST port on the doubler. DVI CowBell STEMMA port aligns to the reset button on the doubler.
Align Doubler to Printed Plate
Use M2.5x6mm screws to attach the doubler to the stand-offs on the printed plate.
Optional top grill
The top grill is used to mount additional STEMMA sensors.
Use M2.5x12mm long M-F hex standoffs to attach to the printed mount.
The printed grill is secured to the stand-offs with M2.5x6mm screws.
Connect mini HDMI + Power
Use a mini HDMI to HDMI cable to connect to a TV.
Most TVs include a powered USB port on the back that can be used to power the Pi Pico and DVI CowBell.
Mini DVI monitor
The printed plate is compatible with the 7" IPS monitor
Use M4 screws to mount to the back of the monitor.
Make wires compact by using a combination of our DIY HDMI / DVI and USB ribbon cables
Page last edited April 16, 2024
Text editor powered by tinymce.
