3D Printed Parts
STL files for 3D printing are oriented to print "as-is" on FDM style machines.
Parts are designed to 3D print without any support material using PLA filament.
Original design source files may be downloaded using the links above.
Slice with Settings for PLA material
The parts were sliced using CURA using the slice settings below.
- PLA filament 200c extruder
- 0.2 layer height
- 10% gyroid infill
- 60mm/s print speed
- 60c heated bed
Page last edited April 16, 2024
Text editor powered by tinymce.
