3D Printed Parts
STL files for 3D printing will need to be oriented for print using either FDM or SLS machines.
Parts were built with PLA filament.
Original design source files may be downloaded using the links below.
Slice with Settings for PLA material
The parts were sliced using CURA using the slice settings below.
- PLA filament 200c extruder
- 0.2 layer height
- 10% gyroid infill
- 60mm/s print speed
- 60c heated bed
Supports
- Placement: Everywhere
- Support Overhang Angle: 80
- Support Destiny: 10%
- Enable Support Interface
- Enable Support Roof
- Support Z Distance: .21
- Brim: 6

Dune Sand Worm Thumper
Page last edited June 04, 2024
Text editor powered by tinymce.