3D Printed Parts

The parts in this kit are designed to be 3D printed with FDM based machines. STL files may need to be reoriented and cut to print without supports. The smaller version of the dragon can print as one piece with supports. Reference the suggested settings below.

Two dragon options are available to download. One is a free version of the dragon model. A second paid version includes multiple flames and sizes of the dragon and flames.  

Settings

Use these settings as reference. Values listed were used in Ultimaker's CURA 3.X slicing software.

  • 0.2mm Layer Height / 0.4mm nozzle
  • 0.38mm Line Width (inner & outer widths)
  • 70mm/s printing speed
  • 20% infill
  • Supports: No
  • Brim: 7mm

Filament Colors

Here are the two filament colors used in this project. To diffuse the flames we used Translucent PLA. The rest of the dragon's body is printed in black glitter infused PLA, Vertigo Galaxy, by Fillamentum.com 

This guide was first published on Apr 30, 2019. It was last updated on Apr 30, 2019.

This page (3D Printing) was last updated on Dec 08, 2021.

Text editor powered by tinymce.