3D Printing an Enclosure

This case design fits the ORIGINAL Model B Pi. For newer boards such as the Pi 3, check Thingiverse.com for alternative case designs that could be adapted.

3D Print a Camera Enclosure!

We designed a multi-part enclosure that snap fits together. Optimized for PLA to print without any rafts or supports! Follow our recommend print/slicing settings for best results. Our assembly guide walks your through the process of putting it together.

Snap-fit color enclosure

Print pitouch-cover.stl file in a different color for a stylish look. We used transparent green PLA for the cover and true white for the rest, but you can choose any color you like.

Optional Parts

  • ptouch-tripod.stl If you don't want a Tripod Mount
  • ptouch-band.stl If you don't want Grippy edges
  • ptouch-camring.stl If you don't want interchangeable lenses.
pitouch-top.stl
about 75 minutes
14g
Houses the camera and Raspberry Pi. Snaps to pitouch-bottom.
PLA @230
2 shells
15% Infill
2.0 Layer Height
90/150mm/s
pitouch-bottom.stl
about 70 minutes
13g
Houses the touch screen and Raspberry P. PLA @230
2 shells
15% Infill
2.0 Layer Height
90/150mm/s
pitouch-cover.stl
about 30 minutes
6g
Fits inside pitouch-top.stl. Raspberry Pi Camera press-fits to cover. PLA @230
2 shells
15% Infill
2.0 Layer Height
90/150mm/s
pitouch-tripod.stl
about 35 minutes
6g
Mounts to bottom of pitouch-top.stl and pitouch-bottom.stl 2 shells
15% Infill
2.0 Layer Height
90/150mm/s
pitouch-band.stl
about 25 minutes
5g
Attaches to sides of pitouch-top.stl and pitouch-bottom.stl. Adds grip and keeps pitouch-tripod mounted to pitouch-top.stl and pitouch-bottom.stl. NinjaFlex @225
2 shells
15% Infill
2.0 Layer Height
90/150mm/s
pitouch-camring.stl
about 3 minutes
0.5g 
Snaps to pitouch-top.stl camera hole.  PLA @230
2 shells
15% Infill
2.0 Layer Height
90/150mm/s
Last updated on 2016-11-23 at 08.12.16 PM Published on 2014-01-14 at 04.54.19 PM