Ingredients
You will need:
- "Pony" 3/4" pipe clamp (check your local hardware store)
- 3/4" schedule 40 pipe: 1 x 8" threaded both ends
- 1" schedule 40 pipe: 1 x 10" threaded on one end, 1 x 3' no threads
- 1 1/4" schedule 40 pipe: 1 x 4" no threads, 1 x 3' threaded on one end
- 3/4" to 1" coupler
- 1 1/4" steel coupler
- 2" square steel stock: 1 x 2'
- 1 1/4" angle steel stock: 2 x 3"
- 2" flat steel or square stock: 2 x 3", 2 x 2'
- 3 x 3/8" eyebolts
- 3 x 3/8" hex nuts
- Thick closed-cell foam (neoprene)
All of which is available at your local hardware store or, better yet, welding supply shop
You will also need:
- Welder (oxyacetalene, MIG, stick, TIG, 2 car batteries, etc)
- Drill press
- Hacksaw, bandsaw, to cut stock to desired lengths
- Bench-mounted vice
- File and/or grinder
