This tutorial may be outdated. It is no longer recommended for beginners, and may need modifications to code or hardware that is not indicated in the tutorial.

3D Printing

Our 8 piece design is snap-fit enclosure that houses the components inside the NTSC/PAL Video Glasses. Each piece is labeled below noted with connections.

  • hud-eye.stl > hud-cap.stl
  • hud-cap.stl > hud-elbow.stl
  • hud-elbow.stl > hud-kopincap.stl
  • hud-kopincap.stl > hud-kopin.stl
  • hud-kopin.stl > hud-bridge.stl
  • hud-bridge.stl > hud-power.stl
  • hud-power.stl > hud-cover.stl
MakerWare Settings No Raft/Support
.02 layer height
10% infill
2 shells

about 2 hours
This guide was first published on Apr 18, 2014. It was last updated on Apr 18, 2014. This page (3D Printing) was last updated on May 22, 2019.