Make the following connections between the MEMENTO camera board and the metal pushbutton:
- MEMENTO A0 Signal to pushbutton NO
- MEMENTO A0 GND to pushbutton COM
- MEMENTO A1 Signal to pushbutton LED+
- MEMENTO A1 GND to pushbutton LED-
Power
The suggested battery for this project has a capacity of 420mAh for a total of about 1.55 Wh and plugs directly into the MEMENTO's 2-Pin JST-PH port.
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
$6.95
In Stock
However, the MEMENTO does run out of battery power quickly. We suggest plugging the MEMENTO into USB-C and using a wall power supply.
We love the Raspberry Pi 4 and 5, with their fancy new USB Type C power connectors. Now we have an even better power supply that can be used with either Pi 4 or even...
$5.95
In Stock
Page last edited March 08, 2024
Text editor powered by tinymce.
