This tiny slide switch soldered to a JST extension cable is great way to extend your battery power button. Make sure to use shrink tubing to secure the soldered connections
The resistors are included with the MLX90614. These two resistors can be solder directly on to the GEMMA. Both of them will share the 3V pin of the GEMMA.
And heres what the bare circuit looks like. A bit different then the circuit diagram, right? You will need to ensure the MLX90614 temperature sensor is orientated the correct way in order to solder the connections properly. You can trim the terminals of the sensor. Be sure to use shrink tubing to secure the connections on the sensors.