• Using a table saw, cut the 2 X 8' pieces of 2X4 in half into 4 X 4' pieces.
    • If you don't have access to a table saw, you can get your wood cut at any local home improvement store like Lowe's or Home Depot for pretty cheap.
  • Use a ruler and a pencil to measure out the pieces of wood.
  • On one 8' piece, measure out 4 X 12" pieces which will be our legs for the tumbler.
  • On the second piece measure out 2 X 10" pieces which will be the short connectors.
  • On the third piece measure out 2 X 18" pieces which will be the long connectors.
  • The fourth piece can be used for any mistakes or just to keep as scrap wood.
  • Use a table saw (or home improvement store or a hand saw) to cut the pieces accordingly.

 

 

This guide was first published on Jun 27, 2018. It was last updated on Jun 27, 2018.

This page (Measuring and Cutting Parts) was last updated on Jun 15, 2018.

Text editor powered by tinymce.