No 3D printer? 3D Printing Services

Check out or for a directory listing of local 3d printing operators to get your parts printed for reasonable prices! Search from dozens of makers and see reviews and printed samples.

This enclosure is a two part design optimized to print with FDM 3D printers. The two parts are secured together with #4-40 Phillips machine screws. Features openings for the HDMI port, power and dimming switches and micro USB port. There's also a fixture at the bottom for securing a standard 1/4-20 tripod thread screw for mounting.

PLA Filament

These parts are optimized for printing in PLA material. The parts print best with no support or raft.

Slicing Software

The recommend settings above should work with most slicing software. However, you are encouraged to use your own settings since 3D printers and slicing software will vary from printer to printer.



@235 PLA
10% Infill
0.2 Layer Height
2 Shells
90/120 Feed / Travel Speeds

about 2 hours to print.

This guide was first published on Dec 10, 2014. It was last updated on Dec 10, 2014.

This page (3D Printing) was last updated on Dec 05, 2014.

Text editor powered by tinymce.