3D Printing

Parts & Settings

permapad-bot.stl
permapad-top.stl
permapad-cover.stl

PLA @220
10% infill
2 shells
.2mm layer height
50/40 speeds

Takes about 2 hours and 28 grams ($1.29)

perma-dpad.stl
perma-ab-buttons.stl
perma-bt.stl
perma-start-select.stl

Semiflex or Ninjaflex
Extruder @230
4 top layers
10% infill
.2mm layer height
2 shells

Takes about 15 minutes and 3 grams ($0.14)

Printing Parts

The enclosure parts can be printed in PLA or ABS filament. PLA material tends to have less warped corners. We printed out the controller buttons in TPE filament, which makes them flexible and rubbery. No support material is required for the parts.

STLs are oriented to "print-as-is". Our recommend slice settings work well with Printrbots and Orion delta machines.

This guide was first published on Feb 15, 2015. It was last updated on Feb 15, 2015. This page (3D Printing) was last updated on Oct 19, 2019.