The enclosure is designed in SolidWorks, and printed on a Makerbot Replicator 2 but will fit in nearly any small 3D printer bed. Customize it with your favorite logo!

Makerbot Desktop Print Settings:

  • Infill: 15%
  • Shells: 2
  • Layer Height: 0.10mm
  • Extruder Temperature: 230°C
  • Speed while Extruding: 90 mm/s
  • Speed while Traveling: 150mm/s
  • With raft but no support

This guide was first published on Sep 04, 2014. It was last updated on Sep 04, 2014.

This page (3D Printing) was last updated on Sep 02, 2014.

Text editor powered by tinymce.