Assembly

Now the boards snap together: the Dotstar wing on top of the LSM303 wing, which is on top of the Feather M0.

That arrangement puts the accelerometer chip pretty much smack-dab in the middle of the entire thing. Which is exactly where it should be.

The white? I put a couple pieces of white label stickers (the ones I use to label the drawers in my parts cabinets) over the Dotstars as a slight diffusion layer to make them show better on camera.

Last updated on 2018-01-23 at 06.31.03 PM Published on 2018-01-23 at 08.53.11 PM