This guide is part of a series of guides that cover the basics of using Adafruit IO WipperSnapper. It will show you how to send push-button data to Adafruit IO, without writing a single line of code.

WipperSnapper is an interface for Adafruit IO, Adafruit's incredibly easy-to-use IoT platform, designed to turn any WiFi-capable board into an IoT device without programming a single line of code. 

Simply load the WipperSnapper firmware onto your board, add credentials, and plug it into power. Your board will automatically register itself with your Adafruit IO account.

From there, you can add components to your board such as buttons, switches, potentiometers, sensors, and more! Components are dynamically added to hardware without the need for re-programming your board.

Parts

Aww yeah, it's the Feather you have been waiting for! The HUZZAH32 is our ESP32-based Feather, made with the official WROOM32 module. We packed everything you love...
$19.95
In Stock
As technology changes and adapts, so does Adafruit. This  USB Type A to Type C cable will help you with the transition to USB C, even if you're still...
$4.95
In Stock
Little clicky switches are standard input "buttons" on electronic projects. These work best in a PCB but
$2.50
In Stock
ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you!This is a 25 Pack of 10K...
$0.75
In Stock
This is a cute half-size breadboard, good for small projects. It's 2.2" x 3.4" (5.5 cm x 8.5 cm) with a standard double-strip in the middle and two power rails on both...
$5.00
In Stock
75 flexible stranded core wires with stiff ends molded on in red, orange, yellow, green, blue, brown, black and white. These are a major improvement over the "box of bent...
$4.95
In Stock

This guide was first published on Sep 30, 2021. It was last updated on 2021-09-30 19:08:33 -0400.

This page (Overview) was last updated on Oct 15, 2021.

Text editor powered by tinymce.