Connecting To The Library

With the WiFi Dongle plugged in and the Raspberry Pi powered up we should see a Wifi connection labeled Pi_AP or what you had renamed the SSID to earlier. Select that network to connect to. Depending on your device used you might get a no internet connection warning.

In your web browser go library.local this may be different if you used a different hostname.

The library.local link works for most web browsers that I tested except Microsoft Edge. On the Edge browser you need to put in the IP adress. From an earlier step we set that to 192.168.42.1

This guide was first published on Dec 09, 2016. It was last updated on Dec 09, 2016. This page (Connecting To The Library) was last updated on Aug 20, 2019.