Angled shot of assembled Adafruit Assembled Pi Cobbler Breakout on a populated breadboard connected to a Raspberry Pi A via a GPIO ribbon cable.
Now that you've finally got your hands on a Raspberry PiĀ® Model B , you're probably itching to make some fun embedded computer...
Discontinued
BeagleBone Black development board
Note: As of May 12, 2014 Adafruit is shipping Rev C. We have discontinued selling Rev B. There are no exchanges or "upgrades" for Rev B to Rev C. If you liked the BeagleBone...
Discontinued
BeagleBone Black development board
Adafruit is no longer shipping the BeagleBone Black Rev B, it has been replaced with the Rev C as of 5/12/14 - the Rev C now has...
Discontinued
Miniature WiFi USB Module
Make your Internet of Things device cable-free by adding WiFi. Take advantage of the Raspberry Pi and Beagle Bone's USB port to add a low cost, but high-reliability wireless link....
Discontinued
Sensor module with three wires
Discontinued - you can grab AM2301B - Wired Enclosed AHT20 - Temperature and Humidity Sensor instead!The...
Discontinued
DHT11 basic temperature-humidity sensor with 10K resistor
Discontinued - you can grab the DHT20 - AHT20 Pin Module - I2C Temperature and Humidity...
Discontinued
DHT22 temperature-humidity sensor with 10K resistor
The DHT22 is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air and spits out a digital...
Discontinued
BeagleBone Black development board
If you liked the BeagleBone Black Rev B, you will love the Rev C! The Rev C has a blistering 1GHz AM3358 processor and 512MB onboard DDR3 RAM, two 46-pin headers, micro HDMI for...
$78.00
In Stock