Overview

Fumey The Fume Extrator

Here’s how to turn a PC fan into a solder fume extractor using a 3D printed retainer. Use an activated carbon filter to catch that pesky solder smoke and eliminate the smell of fumes. This 12VDC desktop PC fan is already in a nice enclosure and it's doesn't take much space on your desk.

Air Clean Friendly

The air suction from the fan is pretty decent and allows you to work at a minimal distance. I find it catches most of the solder smoke which is great for working indoors with other people.

1 x Miniature Desktop Fan
12V Desktop Fan (145.0mm x 116.0mm x 43.0mm)
1 x Power Supply
9 VDC 1000mA regulated switching power adapter

Carbon Filter for Solder Smoke Absorption

PRODUCT ID: 3836
If you do a lot of soldering indoors, a Carbon Filter is essential for absorbing that solder smoke and leaving your air smelling fresh.These measure about...
$1.95
IN STOCK

Miniature Desktop Fan - 12V

PRODUCT ID: 3544
This little desktop fan is simple but super handy. It's a ~12VDC fan in a nice enclosure, you can sit it on your desk and power it off...
OUT OF STOCK
This guide was first published on Apr 17, 2018. It was last updated on Apr 17, 2018. This page (Overview) was last updated on Aug 20, 2019.