Install Carbon Filter
To fit the carbon filter into the retainer, you’ll need to cut it down to size with a pair of scissors. The filter slides into the holder and is pushed down all the way through. The filter should have a loose fit to allow replacing the filter.
Install Retainer
Place the retainer over the hood of the fan and insert the edges over the flange. Press down to slide the retainer over the hood. It should have a snug fit. The edges clip onto the fan and hold in place.
Power Fan
A power supply is not included - technically it is rated for 12VDC but we've used it at 9VDC just fine. You can pick up a 9V 1A power supply here or if you have USB outlets, try a 12V USB booster cable.
Remix & Share
This is a simple design and there's a lot of room for expanding this project. Would you like to add a pocket to hold various tools? How about some LEDs for extra lighting? There’s so many things to do but this gives you a basis to get out there and start making.
Make something and put some images up on our discord channel, show your prints and tell us your slice settings! Show em’ to your friends so we all can see what your making!
We want to hear from ya so get on that discord channel, follow us on the instagram and keep on making, sharing and don't forget to make a great day!
Page last edited March 08, 2024
Text editor powered by tinymce.
