3D Printing

The 3D files for this project can be downloaded by clicking the button below.

This design for this project is based on the Dumpster model created by Simon Kangiser.

Printing the Dumpster

The dumpster prints in five different files, which are assembled together after printing.

The three large parts -the bin, the lids, and the hinge, will take the longest to print. Everything is sized so that it should press-fit together snugly.

The wheels and bar are optional, as the wheels can be replaced with little rubber bumper feet, and the bar that hold the lids to the hinge can be replaced with a straightened out paper clip or something similar if you'd prefer not to print those parts. 

This guide was first published on Nov 06, 2019. It was last updated on Nov 06, 2019. This page (3D Printing) was last updated on Nov 17, 2019.