A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing 128x64 OLED: it adds a gorgeous 128x64 monochrome OLED plus 3 user buttons to any Feather main board. Using our 

Totaling 420 pieces, this White Nylon M2.5 Screw Set is a must-have smörgåsbord for your workstation. You'll have more than enough screws, nuts, and hex standoffs to construct your maker projects for days on end! M2.5 screws fit nearly...

This cable is not only super-fashionable, with a woven pink and purple Blinka-like pattern, it's also made for USB C for our modernized breakout boards, Feathers and more.  If you want something just like it but for Micro B, we have a B...

These two Female Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business!What do they do? They get soldered on either side of the Feather...

These two Female Stacking Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business!What do they do? They stack. Put the headers through your Feather and then you can...

You have some electrons over here, and you want them over there but you don't want the electrons from over there to be able to come over here? That's what a diode is for, these are directional current valves and have the benefit of being waaay smaller than vacuum tubes.

For crafting your very own custom keyboard, these Kailh Red Linear mechanical key switches are deeee-luxe! With smooth actuation and Cherry MX compatibility, they're lovely when you want a smooth linear keystroke:Type LinearOperating...

Get ready to customize your keeb with a 10 pack of two-part plastic keycaps for your next mechanical keyboard or NeoKey project.Each keycap comes with a off-white base and a clear cover piece. You...

Keep your electronics from going barefoot, give them little rubber feet! These small sticky bumpers are our favorite accessory for any electronic kit or device. They are sticky, but not impossible to remove. They're small enough to fit onto any board, and have just enough height to give...