Create a high-end, custom keypad using NeoKey Ortho Snap-apart PCBs, mechanical keyswitches, keycaps, a QT Py, and an aluminum case.
You can create anything from a USB HID keypad, to MIDI controller, to music clip launcher using this design.
Code it in Arduino on the QT Py M0, or you could opt instead for a QT Py RP2040 and use CircuitPython as well.
For all the DIY keebfans in the house here is a very fancy and sturdy 4x4 Keypad
$39.95
In Stock
For folks who want ready-to-go keeb action, we've got the lovely Adafruit Macropad with a 3x4 grid of MX+NeoPixel key switches -...
Out of Stock
What a cutie pie! Or is it... a QT Py? This diminutive dev board comes with our favorite lil chip, the SAMD21 (as made famous in our GEMMA M0 and Trinket M0 boards).This time it...
$7.50
In Stock
If you're looking to make a custom cable with any two of our USB or HDMI adapters, then you'll need to have these flex cables handy! Making custom cables has never been...
Out of Stock
If you love DIY cable-rigging, then these USB adapters are right up your alley! Making custom USB cables has never been easier. Just grab one of our
$4.95
In Stock
If you love DIY cable-rigging, then these USB adapters are right up your alley! Making custom USB cables has never been easier. Just grab one of our
$4.95
In Stock
For crafting your very own custom keyboard, these Kailh Red Linear mechanical key switches are deeee-luxe! With smooth actuation and Cherry MX compatibility,...
$7.95
In Stock
