The Adafruit MONSTER M4SK is our most user friendly eyes project to date! This guide offers practical tips for creating your own custom texture map graphics to use on the iris and sclera for your bespoke eyeballs!

Parts

MONSTER M4SK DIY Electronic Face mask.  Two Screens Display Eyes that blink and dart up and down.
Peep dis! Have you always wanted to have another pair of eyes on the back of your head? Or outfit your costume with big beautiful orbs? The MONSTER M4SK
$44.95
In Stock
JST SH 9-Pin jumper Cable
This 9-pin cable is just about 100mm / 4" long and fitted with JST-SH female connectors on both ends. Compared with chunkier JST-PH these are 1mm pitch instead of 2mm,...
$1.95
In Stock
Lithium Ion Polymer Battery 3.7v 420mAh with JST 2-PH connector and short cable
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
$6.95
In Stock
Mini Oval Speaker with pico blade connector
Hear the good news! This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. We particularly like...
$1.95
In Stock

Either 2 of the glass lenses

40mm Diameter Convex Glass Lens with Edge
The eyes have it! Add this little lens to make a big expression with our Spooky Eyes demo for microcontrollers or Raspberry Pi. These are gorgeous glass (not plastic/acrylic!)...
$5.95
In Stock

Or plastic lenses

Convex Plastic Lens with Edge
The eyes have it! Add this little lens to make a big expression with our Spooky Eyes demo for microcontrollers or Raspberry Pi. These are plastic lenses, with brilliant clarity and a...
$3.95
In Stock

This guide was first published on Aug 25, 2019. It was last updated on Aug 25, 2019.

This page (Overview) was last updated on Aug 01, 2022.

Text editor powered by tinymce.