Ninjaflex TPE Filament

Check out our video and guide on Ninjaflex for printing tips, finishing techniques and recommend slice settings.

Slice Settings

Ninjaflex material works best with direct-drive 3D Printer. Use the recommended settings below to slice your 3D files.

Extruder Temperature: 230c
Print speed: 30mm/sec
Top & bottom layers: 4
Infill: 10%
Shells: 2

This guide was first published on Mar 04, 2015. It was last updated on Mar 04, 2015.

This page (Printing Parts) was last updated on Mar 02, 2015.

Text editor powered by tinymce.