Collect Your Supplies
The first step is to get all of the required components together.
This project will require:
- Silicone (I recommend getting a pint of EcoFlex - I used 00-50)
- Tongue depressors or stirring sticks
- Nitrile gloves
- Mixing cup
- 3d printed components
- 5in each silicone coated wire (red, white, and black)
- Hot glue
- 1x Pro Trinket
- 3x Neopixels
- 1x Pro Trinket LiPo Backpack
- 1x LiPo 3.7v 100mah
- 1x USB microB cable
- 1x Breadboard-friendly SDPT slide switch
- Scale
- Solder
You'll need these tools:
- Soldering Iron
- Hot glue gun
- Xacto
- Nail file
Optional stuff that I used to make the process easier:
- 1x USB LiPo charger
- Vacuum chamber
- Multimeter
Page last edited June 01, 2015
Text editor powered by tinymce.
