Wire for Power and Sound

Plug the 3 AA battery pack into the 2.1mm DC power input on the Crickit.

Insert the two speaker wires into the two Speaker terminals on the Crickit. Either wire can go in either port, it is not polarized. Screw the terminals down into place.

Connect the Servos

Wire the micro servo that drives the eyes to the Servo 1 port on the Crickit board, and the full size servo that flaps the wings to the Servo 2 port. The yellow wire faces out, the dark wire faces towards the Circuit Playground Express.

Minerva is wired and ready for programming!

This guide was first published on Jun 27, 2018. It was last updated on Jun 16, 2024.

This page (Wire the Crickit Circuit) was last updated on Mar 08, 2024.

Text editor powered by tinymce.