Adabot and the Reindeer

Save Subscribe
makecode_IMG_6436.jpg

Making the reindeer!
  • Take a piece of brown construction paper and fold it in half.
     
  • Draw the 3 reindeer bodies and heads. Each body should be about 3 cm long.
     
  • Cut out the bodies and heads.
     
  • Glue the heads onto the bodies.
     
  • Cut (3) 5 cm long black or brown pieces of pipe cleaner.
     
  • Bend the ends of the pipe cleaners to form antlers.
     
  • Glue onto heads.

Making Adabot and his sleigh!
  • On some red and blue (or whatever colors you want!) construction paper, draw the sleigh top, the sleigh bottom, Adabot and his hat.
     
  • Cut out the pieces and glue them onto each other accordingly.
     
  • With some fake spider web or cotton balls, roll a small piece into a ball for the hat. Take another piece and form into a beard shape. Glue pieces onto Adabot.
     
  • Cut a small piece of skewer and glue to back of Adabot's arm for stability. (Those reindeer can really pull!)

Attaching to pipe cleaners
  • Cut the top folded section of the box off.
     
  • Glue on reindeer and Adabot to the pipe cleaners so they have enough room between each other. It helps to glue the reindeer on their front legs to counterbalance the weight of their antlers.
     
  • Cut a piece of twine that is roughly 20 cm long.
     
  • Glue to Adabot's hand and reindeer.
 Making Attachments Adding LEDs 

This guide was first published on Dec 03, 2018. It was last updated on Dec 03, 2018.

This page (Adabot and the Reindeer) was last updated on Sep 05, 2020.

Text editor powered by tinymce.