28
Beginner
Project guide
Overview
This project shows how to connect a series of buttons, sensors, NeoPixel LED lights, motors, a speaker and more to showcase all the awesome things CRICKIT can do!
This project provides an excellent and entertaining demonstration of the wide variety of functions that CRICKIT for Circuit Playground Express can perform.
Sometimes we wonder if robotics engineers ever watch movies. If they did, they'd know that making robots into servants...
$29.95 each
In Stock
Featured
Circuit Playground Express
Circuit Playground Express is the next step towards a perfect introduction to electronics and programming....
Out of Stock
This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather,...
Out of Stock
This is an FCC/CE certified and UL listed power supply. Need a lot of 5V power? This switching supply gives a clean...
$7.95 each
In Stock
A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own....
No Longer Stocked
A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own....
$5.95 each
In Stock
These Male/Male Jumper Wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium...
$3.95 each
In Stock
Connect this to that without soldering using these handy mini alligator clip test leads. 15" cables with alligator clip...
Out of Stock
Solenoids are basically electromagnets: they are made of a coil of copper wire with an armature (a slug of metal) in the...
$4.95 each
In Stock
Tiny little servo can rotate approximately 180 degrees (90 in each direction) and works just like the standard kinds...
$5.95 each
In Stock
Perhaps you've been assembling a new robot friend, adding a computer for a brain and other fun personality touches....
$2.95 each
In Stock
We're keepin' it wheel with this one! Plastic gear-box motors (also known as 'TT' motors) are...
Out of Stock
Ever wanted to feel like Magneto? Well, now you sort-of can! Bring...
$9.95 each
In Stock
Listen up! This 2.8" x 1.2" speaker is a great addition to any audio project where you need 4 ohm...
$3.95 each
In Stock
Adding glowy color to your projects has never been easier: no more soldering or stripping wires, clip 'em on and glow!...
Out of Stock
This 1K potentiometer is a two-in-one, good in a breadboard or with a panel. It's a fairly standard linear taper...
$0.95 each
In Stock
Oh say can you seeBy the knob's early light...
$0.50 each
In Stock
With our fun assortment of conductive materials,
$2.95 each
In Stock
When working with unusual non-header-friendly surfaces, these handy cables will be your best friends! No longer will...
$3.95 each
In Stock
- A large cardboard box
- Scrap corrugated cardboard
- Hot glue gun
- Hot glue sticks
- A bell
- A protractor (optional)
- Double sided tape
- Hobby knife
- Aluminum foil (can use in place of conductive tape above!)
Page last edited March 08, 2024
Text editor powered by tinymce.
