Crickit Circuit

Save Subscribe
robotics___cnc_eyeballCrickitCircuit.jpg

We'll drive the two servos from the Crickit's servo outputs 1 and 2. Plug the micro servo into port 1 and the full size servo into port 2.

Then, plug the battery pack into the DC power jack on the Crickit and you'll be ready to start programming it!

robotics___cnc_IMG_3617_2k.jpg
 Make the Eye and Mechanism Code with MakeCode 

This guide was first published on Jun 18, 2018. It was last updated on Jun 18, 2018.

This page (Crickit Circuit) was last updated on Jun 15, 2018.

Text editor powered by tinymce.