Overview

Make your own animatronic eyeball that can look around -- left/right and up/down -- to add to your costumes and props, or simply as a (slightly unnerving) decoration!

With a pair of servo motors and a Crickit board paired with Circuit Playground Express, you can control the animatronic gaze with pre-programmed movements, random glances, or even interactive control.

1 x Adafruit CRICKIT
For Circuit Playground Express
1 x Circuit Playground Express
Incredibly awesome microcontroller board
1 x Standard servo
180 degree rotation servo
1 x Micro Servo
Tiny 180 degree rotation servo
1 x Male DC Power adapter
2.1mm plug to screw terminal block

Materials

For this project, in addition to the above parts, you'll also need:

  • Ping pong ball
  • Corrugated cardboard
  • Hot glue and glue gun or white glue
  • Mask or other prop to contain the your eyeball and mechanism
  • Markers or craft paint for eyeball decoration
This guide was first published on Jun 18, 2018. It was last updated on Nov 16, 2018. This page (Overview) was last updated on Jun 22, 2018.