It's now time to finally test the project! The first step is to modify the Arduino sketch with your own settings, and then upload it to the board.

Then, go over to the dashboard. After a few seconds, you should see that the data appears inside the dashboard:

You can test your dashboard by putting your hand on top of the light level sensor: after a while the light level should go down in the dashboard.

This guide was first published on Apr 20, 2015. It was last updated on Apr 20, 2015.

This page (Visualise Data on Adafruit.io) was last updated on Apr 17, 2015.

Text editor powered by tinymce.