Training a tag on the RFID WIZ couldn't be easier. Simply hold the tag over the red reader board and press the "Train" button.

You'll see the Status light flash green, and you'll see the green LED by the Relay light up as well. This will stay lit until you remove the tag. The green LED displays the state of the relay and 5v logic output. You'll also hear the click of the relay when it changes state.

You can repeat this process with multiple tags.  Training up to 20 tags has been tested with stability. Upwards of 40 should be possible but attempt at your own risk

This guide was first published on Mar 16, 2022. It was last updated on 2022-03-16 14:24:50 -0400.

This page (Training a Tag) was last updated on Apr 03, 2022.

Text editor powered by tinymce.