|or a Micro Servo|
|1 kΩ Resistor (optional)|
|5V Power Supply|
|Female Screw Terminal adaptor|
|Male to Male Jumpers|
To try out this tutorial, you will need:
The 1 kΩ resistor is not strictly necessary, but will protect your BBB from damage is something should go wrong in the servo.
This guide was first published on Jul 15, 2013. It was last updated on Jul 15, 2013.
This page (You Will Need) was last updated on Jul 15, 2013.
Text editor powered by tinymce.