In this tutorial, you will learn how to control a servo from Python using a BeagleBone Black (BBB).
A Python test program will allow you to set the angle of the servo between 0 and 180 degrees.
Download: file
# python servo.py 
Angle (0 to 180 x to exit):90
Angle (0 to 180 x to exit):180
Angle (0 to 180 x to exit):0
Angle (0 to 180 x to exit):x
This guide was first published on Jul 15, 2013. It was last updated on Jul 15, 2013. This page (Overview) was last updated on May 23, 2019.