CIRCUITPY_WIFI_SSID="network_name"
CIRCUITPY_WIFI_PASSWORD="network_password"

CIRCUITPY_WIFI_SSID="network_name"
CIRCUITPY_WIFI_PASSWORD="network_password"

# SPDX-FileCopyrightText: Copyright (c) 2024 Tim Cocks for Adafruit Industries
#
# SPDX-License-Identifier: MIT
import time

import wifi

from adafruit_wiz import SCENE_IDS, WizConnectedLight

udp_host = "192.168.1.143"  # IP of UDP Wiz connected light
udp_port = 38899  # Default port is 38899, change if your light is configured differently

my_lamp = WizConnectedLight(udp_host, udp_port, wifi.radio)


print(f"Current Status: {my_lamp.status}")

print("Setting RGB Color")
my_lamp.rgb_color = (255, 0, 255)
time.sleep(2)

print("Turning off")
my_lamp.state = False
time.sleep(2)

print("Turning on")
my_lamp.state = True

print("Setting Light Color Temperature")
my_lamp.temperature = 2200
time.sleep(2)

print("Lowering the Brightness")
my_lamp.brightness = 10
time.sleep(2)

print("Raising the Brightness")
my_lamp.brightness = 100

print("Available Scenes:")
print(SCENE_IDS.keys())
print("Setting Scene")
my_lamp.scene = "Party"

# SPDX-FileCopyrightText: Copyright (c) 2024 Tim Cocks for Adafruit Industries
#
# SPDX-License-Identifier: MIT
import time

import wifi

from adafruit_wiz import SCENE_IDS, WizConnectedLight

udp_host = "192.168.1.143"  # IP of UDP Wiz connected light
udp_port = 38899  # Default port is 38899, change if your light is configured differently

my_lamp = WizConnectedLight(udp_host, udp_port, wifi.radio)


print(f"Current Status: {my_lamp.status}")

print("Setting RGB Color")
my_lamp.rgb_color = (255, 0, 255)
time.sleep(2)

print("Turning off")
my_lamp.state = False
time.sleep(2)

print("Turning on")
my_lamp.state = True

print("Setting Light Color Temperature")
my_lamp.temperature = 2200
time.sleep(2)

print("Lowering the Brightness")
my_lamp.brightness = 10
time.sleep(2)

print("Raising the Brightness")
my_lamp.brightness = 100

print("Available Scenes:")
print(SCENE_IDS.keys())
print("Setting Scene")
my_lamp.scene = "Party"

# SPDX-FileCopyrightText: Copyright (c) 2024 Tim Cocks for Adafruit Industries
#
# SPDX-License-Identifier: MIT
"""
Basic demonstration of Wiz light control using 4 push buttons each
wired to their own pin.
"""

import board
import keypad
import wifi

from adafruit_wiz import SCENE_IDS, WizConnectedLight

udp_host = "192.168.1.143"  # IP of UDP Wiz connected light
udp_port = 38899  # Default port is 38899, change if your light is configured differently

my_lamp = WizConnectedLight(udp_host, udp_port, wifi.radio, debug=True)

# Basic push buttons initialization with keypad
buttons = keypad.Keys(
    (board.D11, board.D12, board.A1, board.A0), value_when_pressed=False, pull=True
)

# list of colors to cycle through
colors = [(255, 0, 0), (0, 255, 0), (0, 0, 255), (255, 255, 0), (0, 255, 255), (255, 0, 255)]
# current index in the color cycle
cur_rgb_index = 0

# list of temperatures to cycle through
temperatures = [2200, 2800, 3600, 4800, 6200]
# current index in the temperature cycle
cur_temp_index = 0

while True:
    # check for button press events
    event = buttons.events.get()
    if event and event.pressed:
        if event.key_number == 0:
            print("Button 0")
            # toggle the on/off state
            my_lamp.state = not my_lamp.state

        elif event.key_number == 1:
            print("Button 1")
            # set the current RGB color
            my_lamp.rgb_color = colors[cur_rgb_index]
            # increment the index for next time and wrap around to zero as needed
            cur_rgb_index = (cur_rgb_index + 1) % len(colors)

        elif event.key_number == 2:
            print("Button 2")
            # set the current light color temperature
            my_lamp.temperature = temperatures[cur_temp_index]
            # increment the index for next time and wrap around to zero as needed
            cur_temp_index = (cur_temp_index + 1) % len(temperatures)

        elif event.key_number == 3:
            print("Button 3")
            # uncomment to see the available scenes
            # print(SCENE_IDS.keys())

            # set the scene
            my_lamp.scene = "Party"

# SPDX-FileCopyrightText: Copyright (c) 2024 Tim Cocks for Adafruit Industries
#
# SPDX-License-Identifier: MIT
"""
Basic demonstration of Wiz light control using 4 push buttons each
wired to their own pin.
"""

import board
import keypad
import wifi

from adafruit_wiz import SCENE_IDS, WizConnectedLight

udp_host = "192.168.1.143"  # IP of UDP Wiz connected light
udp_port = 38899  # Default port is 38899, change if your light is configured differently

my_lamp = WizConnectedLight(udp_host, udp_port, wifi.radio, debug=True)

# Basic push buttons initialization with keypad
buttons = keypad.Keys(
    (board.D11, board.D12, board.A1, board.A0), value_when_pressed=False, pull=True
)

# list of colors to cycle through
colors = [(255, 0, 0), (0, 255, 0), (0, 0, 255), (255, 255, 0), (0, 255, 255), (255, 0, 255)]
# current index in the color cycle
cur_rgb_index = 0

# list of temperatures to cycle through
temperatures = [2200, 2800, 3600, 4800, 6200]
# current index in the temperature cycle
cur_temp_index = 0

while True:
    # check for button press events
    event = buttons.events.get()
    if event and event.pressed:
        if event.key_number == 0:
            print("Button 0")
            # toggle the on/off state
            my_lamp.state = not my_lamp.state

        elif event.key_number == 1:
            print("Button 1")
            # set the current RGB color
            my_lamp.rgb_color = colors[cur_rgb_index]
            # increment the index for next time and wrap around to zero as needed
            cur_rgb_index = (cur_rgb_index + 1) % len(colors)

        elif event.key_number == 2:
            print("Button 2")
            # set the current light color temperature
            my_lamp.temperature = temperatures[cur_temp_index]
            # increment the index for next time and wrap around to zero as needed
            cur_temp_index = (cur_temp_index + 1) % len(temperatures)

        elif event.key_number == 3:
            print("Button 3")
            # uncomment to see the available scenes
            # print(SCENE_IDS.keys())

            # set the scene
            my_lamp.scene = "Party"

# SPDX-FileCopyrightText: Copyright (c) 2024 Tim Cocks for Adafruit Industries
#
# SPDX-License-Identifier: MIT
"""
Scan the network for Wiz lights. Print out the MAC addresses of any lights found.
Set each light to a different random RGB color.
"""

import random

import wifi

from adafruit_wiz import WizConnectedLight, scan

udp_port = 38899  # Default port is 38899
colors = [(255, 0, 0), (0, 255, 0), (0, 0, 255), (255, 255, 0), (0, 255, 255), (255, 0, 255)]
mac_to_light_map = {}

found_lights = scan(wifi.radio, timeout=1)
for light_info in found_lights:
    mac_to_light_map[light_info["result"]["mac"]] = WizConnectedLight(
        light_info["ip"], udp_port, wifi.radio
    )
    print(f"Found Light with MAC: {light_info['result']['mac']}")

for mac, light in mac_to_light_map.items():
    chosen_color = random.choice(colors)
    print(f"Setting light with MAC: {mac} to {chosen_color}")
    light.rgb_color = chosen_color

# SPDX-FileCopyrightText: Copyright (c) 2024 Tim Cocks for Adafruit Industries
#
# SPDX-License-Identifier: MIT
"""
Scan the network for Wiz lights. Print out the MAC addresses of any lights found.
Set each light to a different random RGB color.
"""

import random

import wifi

from adafruit_wiz import WizConnectedLight, scan

udp_port = 38899  # Default port is 38899
colors = [(255, 0, 0), (0, 255, 0), (0, 0, 255), (255, 255, 0), (0, 255, 255), (255, 0, 255)]
mac_to_light_map = {}

found_lights = scan(wifi.radio, timeout=1)
for light_info in found_lights:
    mac_to_light_map[light_info["result"]["mac"]] = WizConnectedLight(
        light_info["ip"], udp_port, wifi.radio
    )
    print(f"Found Light with MAC: {light_info['result']['mac']}")

for mac, light in mac_to_light_map.items():
    chosen_color = random.choice(colors)
    print(f"Setting light with MAC: {mac} to {chosen_color}")
    light.rgb_color = chosen_color