Electric Imp - SD card with devil icon
What is the electric imp? In essence, the Imp provides an easy, integrated way to connect almost any hardware device both to other devices and to internet services. It's more than...
No Longer Stocked
SD Card breakout PCB with USB connector and header
The April is a handy companion for your Electric Imp card. This breakout board provides just the bare minimum for Imp life support - a socket, an ID chip, and a 3.3v buck power supply...
No Longer Stocked
Angled shot of black, square-shaped thermocouple breakout board with a green 2-pin terminal block.
Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The MAX31855K does everything for you, and can be easily interfaced with any...
guides with product
$14.95
In Stock
Angled shot of a Thermocouple Type-K Glass Braid Insulated wire.
Thermocouples are best used for measuring temperatures that can go above 100 °C. This is a bare wires bead-probe which can measure air or surface temperatures. Most inexpensive...
$9.95
In Stock
Angled shot of tiny breadboard.
This is a tiny little breadboard... half the size of a half-size breadboard! As of Sep 8, 2022 - This Tiny breadboard has been updated to make plugging and...
Out of Stock
Wall wart power supply with 2 US prong power
Need a USB jack for charging or powering a project, but don't want to lug around a computer? This switching supply gives a clean regulated output at up to 1000mA! 110 or 240 input,...
$5.95
In Stock
USB cable with Type A and Mini B ends
This here is your standard A-miniB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Teensy v2, USB Lipo charger w/Mini B connector, among other...
No Longer Stocked
Bundle of multi-colored multi-length wire jumpers
75 flexible stranded core wires with stiff ends molded on in red, orange, yellow, green, blue, brown, black and white. These are a major improvement over the "box of bent...
$4.95
In Stock
Two piece adjustable soldering iron with blobby temperature adjustable body and separate fancy holder
Known by engineers for making excellent quality tools & soldering irons! This is a genuine Hakko FX-888D with digital temperature control! We worked hard to get...
$129.95
In Stock
Angled shot of solder spool.
If you want to make a kit you'll need some solder. This 100g (about 1/4 lb) spool is just the right amount, not too much (like 1 lb spools) and not too little (like those little...
$14.95
In Stock