Skip to main content
Connecting a Push Button to BeagleBone Black Installing the Python Library

Connecting a Push Button to BeagleBone Black

by Simon Monk
published July 30, 2013, last edited July 30, 2013
posted in Development Boards/ BeagleBone
Save Download
3
Beginner
Project guide

Installing the Python Library

This tutorial uses Ångström Linux, the operating system that comes pre-installed on the BBB.

Follow the instructions here, to install the Python IO BBIO library. http://learn.adafruit.com/setting-up-io-python-library-on-beaglebone-black

Page last edited July 30, 2013

Text editor powered by tinymce.

 You will need Wiring 
Related Guides
BeagleBone Black: Installing Operating Systems
By Justin Cooper
5
LED Backpack Displays on Raspberry Pi and BeagleBone...
By Tony DiCola
21
FONA Tethering to Raspberry Pi or BeagleBone Black
By Tony DiCola
30
DHT Humidity Sensing on Raspberry Pi or Beaglebone...
By lady ada
55
SSD1306 OLED Displays with Raspberry Pi and...
By Tony DiCola
22
Measuring Light with a BeagleBone Black
By Simon Monk
5
BeagleBone
By lady ada
23
RePaper eInk Development Board for ARM + GNU/Linux
By Sean Moss-Pultz
2
MCP9808 Temperature Sensor Python Library
By Tony DiCola
11
LedGames - a BeagleBone Black 64x64 LED Game
By Keith Henrickson
52
Adafruit WebIDE
By Tyler Cooper
60
Nokia 5110/3310 LCD Python Library
By Tony DiCola
11
Introduction to the BeagleBone Black Device Tree
By Justin Cooper
13
Blinking an LED with BeagleBone Black
By Simon Monk
2
Adding a Real Time Clock to BeagleBone Black
By Justin Cooper
2
Search

Search

Categories