0

Overview

by Simon Monk
In this tutorial, you will learn how to connect a push button switch to a BeagleBone Black and have it display a message when the button is pressed.
beaglebone_overview_web.jpg
Because the BBB runs Linux, there are many ways in which it can be programmed. In this tutorial we show how to use an input pin using Python.
YOU WILL NEED
Last updated on 2015-05-04 at 04.27.11 PM Published on 2013-07-30 at 11.07.24 AM

RELATED GUIDES

Raspberry Pi Face Recognition Treasure Box
Create a box that only opens when the right person looks at it!
by Tony DiCola
Use a Raspberry Pi, Pi camera, and the OpenCV computer vision library to lock and unlock a box using face recognition.
Controlling a Servo with a BeagleBone Black
Use a BeagleBone Black and Python to set the position of a servo
by Simon Monk
In this tutorial, you will learn how to control a servo from Python using a BeagleBone Black (BBB). A Python test program will allow you to set the angle of the servo between 0 and 180 degrees.
Arduino Lesson 7. Make an RGB LED Fader
Learn Arduino, Lesson 7. Make an RGB LED Fader
by Simon Monk
This is Lesson 7 in the Learn Arduino Adafruit series. In this lesson, you will be combining some of the things that you learnt in earlier lessons to use three push switches (from lesson 6) to control the color of the RGB LED that you used in lesson 3.
POPULAR
TTL Serial Camera
Snap, Snap!
by lady ada
This guide is for our new TTL serial camera module with NTSC video output. These modules are a nice addition to a microcontroller project when you want to take a photo or control a video stream. The modules have a few features built in, such as the ability to change the brightness/saturation/hue of images, auto-contrast and auto-brightness adjustment, and motion detection.